PAGE
Modular Touch Bell Push Rpro — product pageDesigned page · specs & gallery
Overview
Modular Touch Bell Push RPro
The Beakn Modular Touch Bell Push RPro is a capacitive, WiFi-enabled momentary touch bell-push module designed for doorbells. It replaces the mechanical bell-push mechanism in your existing ROMA-format modular plate — no new plate, no new wiring, no hub. A single touch triggers the doorbell, and the module brings the full Beakn smart ecosystem with it: app control, voice assistants, schedules, automations, and customizable LED indicators, all with no subscription fee.
It is part of the Beakn Modular Touch Switch range and is available in two plate-locking series — RPro (ROMA-format plates) and VPro (Vihan-format plates) — with identical specifications and features. This document covers the RPro variant.
Features
Touch & Hardware
•Capacitive momentary touch — a single touch triggers the bell; no button to press or depress, no mechanical parts to wear out
•100,000 switching cycles — at ~20 uses per day, that exceeds 13 years of reliable operation
•Surge protection — rated 2.5KV, tested up to 4KV; protects the module and connected bell circuit
LED Indicator
•Custom ON/OFF colours — set different LED colours for the bell-push state via the Beakn app (e.g. blue at rest, white on press)
•Adjustable brightness — 0–100% via app
•Night Mode — auto-dims the LED indicator after a user-set time so it doesn't glow intrusively at night
Smart & App Features (20 features, no subscription)
•Schedules
•Auto-off timers
•Countdown timers
•Sunrise/sunset triggers
•Routines and scenes
•Sensor workflows
•Scene-trigger conversion
•Safe Mode voltage protection — auto-disconnects above 280V or below 200V
•Lock Room with alerts
•Full offline mode
•Running-hours tracking per channel
•Estimated energy cost
•ON/OFF history
•Intelligent reminders
•Siri Shortcuts
•Google Assistant & Amazon Alexa commands
•NFC tag control
•Home-screen shortcuts
•Responds to touch, voice, app tap, and NFC
Connectivity
•WiFi direct — no hub, no bridge required
•Offline resilience — touch panel, schedules, and timers continue working without internet; only remote access requires an internet connection
•Voice control — Google Assistant, Amazon Alexa, Apple Siri
Use Cases
| Scenario | How the Bell Push RPro helps |
|---|---|
| Main entrance doorbell | Replaces the existing mechanical bell-push in the ROMA plate at the front door; capacitive touch triggers the doorbell cleanly |
| Visitor alerts via app | Every bell-press can trigger an app notification, so you're alerted even when away from home |
| Scheduled doorbell silence | Use automations to mute or redirect bell activity during nap times, night hours, or meetings |
| NFC-triggered bell | Stick an NFC tag near the entrance; visitors or family members can tap to trigger without touching the switch |
| Voice-activated test | Ask Alexa or Google to trigger the bell for testing or for accessibility needs |
| Night Mode entrance | LED indicator auto-dims at night so it doesn't illuminate the entrance area unnecessarily |
| Gradual smart upgrade | Mix with non-smart modules in the same ROMA plate — upgrade just the bell-push now, add more smart modules later |
What's in the box
What's in the Box
•Beakn Modular Touch Bell Push RPro module
Compatibility
Compatibility
Plate compatibility
•RPro refers to the plate-locking format for ROMA-format modular plates
•Compatible with Anchor Roma, Legrand Myrius, GM Modular, Havells Crabtree, and 25+ other ROMA-compatible Indian plate brands
•If your plate is Schneider Vihan or ZENcelo, choose the VPro variant instead
•RPro and VPro are functionally identical — same specs, same features, same app, same 20 features; only the plate-locking mechanism differs
Electrical compatibility
•Neutral wire required at the switchboard
•Operating voltage: 110–250V AC, 50/60Hz
•Compatible with Indian single-phase supply
•Works with a standard bell/chime unit connected in your circuit
System compatibility
•Works with Google Assistant, Amazon Alexa, and Apple Siri
•Can be mixed with non-smart modules in the same ROMA plate, including standard mechanical switches, fan regulators, sockets, or any ROMA-compatible mechanism
•WiFi direct means no hub and no bridge required
Specifications
| Product type | Momentary touch bell-push module |
|---|---|
| Touch technology | Capacitive — 100,000 switching cycles |
| Operating voltage | 110–250V AC, 50/60Hz |
| Neutral wire | Required at the switchboard |
| Max load — incandescent/resistive | 800W per channel |
| Max load — LED | 100W or 5 units per channel |
| Max load — inductive | 400W per channel |
| Standby power | < 0.8W |
| Surge protection | 2.5KV rated, tested up to 4KV |
| LED status indicator | Customizable ON/OFF colours via app; brightness 0–100%; Night Mode |
| Module dimensions | 50 × 50 × 49mm |
| Connectivity | WiFi — no hub needed |
| Offline control | Touch panel, schedules, and timers work without internet |
| Voice assistants | Google Assistant, Amazon Alexa, Apple Siri |
| Plate series | RPro (ROMA-format plates) |
| Warranty | 3 years |
| Free installation | Available in 8 cities |
| App features | 20 features included free — no subscription |
Installation
Installation
What You Need Before Installing
•An existing ROMA-format modular plate (Anchor Roma, Legrand Myrius, GM Modular, Havells Crabtree, or any of 25+ ROMA-compatible Indian brands)
•A neutral wire available at the switchboard — this is mandatory for all Beakn Modular Touch variants; confirm with your electrician before purchase
•A standard bell/chime unit connected in your circuit
Installation Process
1.Switch off the MCB/circuit breaker for the bell circuit
2.Remove the existing mechanical bell-push module from the ROMA plate — the plate, screws, and frame stay in place
3.Connect wiring to the Beakn Bell Push RPro module terminals (live, neutral, load — matching your existing bell circuit)
4.Snap the RPro module into the ROMA plate — it locks into the same plate-locking points as any ROMA-format mechanism
5.Restore power and follow the in-app setup to connect to WiFi and configure LED colours, Night Mode, and automations
6.No new plate, no new frame, no new screws required
Wiring Notes
•Neutral wire is required at the switchboard — most Indian switchboards already have one; your electrician can confirm
•The bell-push is a momentary contact — wiring follows standard bell-push circuit topology (live → switch → bell → neutral)
•Operating voltage range: 110–250V AC, 50/60Hz — compatible with Indian single-phase supply
Mixing Smart and Non-Smart Modules
•You can install the Bell Push RPro alongside non-smart modules (standard mechanical switches, fan regulators, sockets) in the same ROMA plate
•Any ROMA-compatible mechanism from Anchor, Legrand, GM, Havells, or 25+ other brands can share the same plate
•Add smart control one module at a time — no need to replace the whole plate at once
Professional Installation
•Free installation available in 8 cities through Beakn's service network
•Recommended for anyone unfamiliar with modular wiring
User Manual
Manual
Use Cases
| Scenario | How the Bell Push RPro helps |
|---|---|
| Main entrance doorbell | Replaces the existing mechanical bell-push in the ROMA plate at the front door; capacitive touch triggers the doorbell cleanly |
| Visitor alerts via app | Every bell-press can trigger an app notification, so you're alerted even when away from home |
| Scheduled doorbell silence | Use automations to mute or redirect bell activity during nap times, night hours, or meetings |
| NFC-triggered bell | Stick an NFC tag near the entrance; visitors or family members can tap to trigger without touching the switch |
| Voice-activated test | Ask Alexa or Google to trigger the bell for testing or for accessibility needs |
| Night Mode entrance | LED indicator auto-dims at night so it doesn't illuminate the entrance area unnecessarily |
| Gradual smart upgrade | Mix with non-smart modules in the same ROMA plate — upgrade just the bell-push now, add more smart modules later |
Configuration
Configuration
•Follow the in-app setup after restoring power to connect the module to WiFi
•Configure LED colours for ON/OFF states via the app
•Adjust LED brightness from 0–100%
•Set Night Mode so the LED auto-dims after a user-set time
•Configure schedules and timers
•Set up automations, including sunrise/sunset triggers, routines and scenes, sensor workflows, and scene-trigger conversion
•Enable Safe Mode voltage protection for auto-disconnect above 280V or below 200V
•Use Siri Shortcuts, Google Assistant, Amazon Alexa, NFC tag control, and Home-screen shortcuts
Reset
Reset
No reset information was provided in the knowledge bank.
Troubleshooting
Troubleshooting
Offline behavior
•The touch panel, schedules, and timers continue working without internet
•Only remote access requires an active internet connection
Voltage safety
•Safe Mode voltage protection auto-disconnects above 280V or below 200V
Installation requirement checks
•If the module does not operate, confirm that a neutral wire is available at the switchboard
•Confirm the wiring follows the standard bell-push circuit topology (live → switch → bell → neutral)
•Verify the module is installed in a ROMA-format plate if using the RPro variant
FAQ
Q: What does "RPro" mean?
RPro refers to the plate-locking format. RPro modules snap into ROMA-format modular plates — Anchor Roma, Legrand Myrius, GM Modular, Havells Crabtree, and 25+ other ROMA-compatible Indian plate brands. If your plate is Schneider Vihan or ZENcelo, choose the VPro variant instead.
Q: What is the difference between RPro and VPro?
Functionally identical — same specs, same features, same app, same 20 features. The only difference is the plate-locking mechanism. RPro locks into ROMA-format plates; VPro locks into Vihan-format plates (Schneider). Choose based on your existing plate brand.
Q: Is a neutral wire really required?
Yes. A neutral wire must be available at the switchboard for the Bell Push RPro (and all Beakn Modular Touch variants) to operate. Most modern Indian switchboards already have a neutral run to switch points. Your electrician can confirm before installation.
Q: Does it work as a standard bell-push (momentary contact)?
Yes. The Bell Push RPro is a momentary-action module — it triggers the bell on touch and releases immediately, exactly like a mechanical bell-push button.
Q: Will it work if my WiFi goes down?
Yes. The touch panel continues to operate the doorbell locally without internet. Schedules and auto-off timers also run locally. Only remote access (controlling from outside your home network) requires an active internet connection.
Q: Can I connect it to Google Assistant or Alexa?
Yes. The Bell Push RPro works with Google Assistant, Amazon Alexa, and Apple Siri for voice-triggered control and automation routines.
Q: How long will it last?
The capacitive touch panel is rated for 100,000 switching cycles with no moving parts. At a conservative 20 activations per day, that is over 13 years of operation.
Q: Is there a subscription fee for the app features?
No. All 20 app features — schedules, automations, energy monitoring, Safe Mode, Night Mode, NFC control, voice integration, and more — are included free for life, with no subscription.
Q: Can I mix the Bell Push RPro with non-smart modules in the same plate?
Yes. You can combine the Bell Push RPro with standard mechanical switches, fan regulators, sockets, or any ROMA-compatible mechanism in the same modular plate. You do not need to replace the entire plate to go smart.
Q: My plate is Anchor Roma — which variant do I buy?
The RPro variant. Anchor Roma is a ROMA-format plate. RPro covers Anchor Roma, Legrand Myrius, GM Modular, Havells Crabtree, and 25+ other ROMA-compatible Indian plate brands.